Zip-Chem® Calla® Zip-Strip™ 125M Water Rinseable CIC Remover, 16 oz. Aerosol

This item is hazardous and may be subject to an additional handling fee.

The Zip-Chem 102614 is a water rinsable CIC remover for exterior aircraft surfaces.

• A fast acting neutral pH CIC remover
• Removes wet, waxy, and/or dry film CICs (Corrosion Inhibiting Compounds)
• Rinseable with water
• Very effective even after a short dwell time

• Use for the removal of CIC’s
• Effective against a wide range of aviation soils, such as MoS2 grease, hydraulic fluid, wax, and carbon deposits
• The Zip-Strip™ 125M aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be cleaned. Please refer to our Formit® technical data sheet for more information
• Apply Zip-Strip™ 125M by aerosol, airless, air-assist, dipping, or brushing
• Apply material at a thickness of 2 to 7 mils (51-178 microns), depending on the thickness and age of the material to be removed. The material should also be allowed to dwell for 5-10 minutes (10-20 minutes for heavy duty removal) and then pressure sprayed or rinsed off
• Do not allow material to dry on the surface. If drying commences, apply a light film of additional Zip-Strip™ 125M and rinse off
• The components are biodegradable but the contaminants that the cleaner removes may not be. Handle effluent accordingly

• Airbus AIMS 09-00-002
• Boeing D6-17487